Product ID:FYRQUEL 550 HYDRAULIC FLUID
MSDS Date:01/01/1985
FSC:9150
NIIN:00N001213
MSDS Number: BCHHF

Emergency Phone: (203) 226-6602

Cage: DO667

Telephone: (203) 226-6602

Cage: DO667

BUTYLATED TRIPHENYL PHOSPHATE ESTERS (MIXED ISOMERS)- MAJOR

TRIPHENYL PHOSPHATE

CAS: 115-86-6

RTECS: TC8400000

OSHA PEL 3 MG/M3

ACGIH TLV: 3 MG/M3; 9192

Effects of Overexposure:RESP. IRRITANT; DYSPNEA,PULMONARY EDEMA; SKIN &
EYE IRRIT;POSSIBLE CHOLINESTERASE INHIBITION (RBC)

First Aid:ING: DO NOT INDUCE VOMITING; GIVE LG AMT OF WATER & CALL MD
IMMEDIATELY. SKIN & EYE CONTACT: FLUSH W/WATER AT LEAST 15 MIN.
REMOVE CONTAMINATED CLOTHING. LIFT EYELIDS TO FLUSH COMPLETELY.
INHAL: REMOV E TO FRESH AIR & CALL A PHYSICIAN.

Flash Point:455F, 235C (C0C)
Extinguishing Media:CO*2, DRY CHEMICAL,FOAM, WATER. TO REMOVE FLAME
SOURCE.
Fire Fighting Procedures:WEAR FULL-FACE SELF-CONTAINED BREATHING
APP.IMPERV. CLOTHING
Unusual Fire/Explosion Hazard:FLUID MAY SUPPORT COMBUSTION F& DECOMP
YIELDING TOXIC PRODUCTS (EG; PHOSPHORUS OXIDES)

Spill Release Procedures:VENTILATE AREA. WEAR PROTECTIVE CLOTHING TO
PREVENT SKIN & EYE CONTACT. SOAK UP LIQ W/SUITABLE ABSORBENT MATL
(EG: SAWDUST, CLAY,VERMICULITE). SWEEP MATL & PLACE IN SEALED STEEL
CONTAINER. LARGE SPILL S SHOULD BE DYKED & PUMPED TO SALVAGE.

Handling and Storage Precautions:STORE IN COOL,DRY, WELL VENTILATED
AREAS AWAY FROM FLAMMABLE MATLS, HEAT/FLAME SOURCES & FOODSTUFFS.
CARBON STEEL IS PREFERRED MATL FOR CONTAINERS.
Other Precautions:EXPOSURE MAY CAUSE CHOLINESTERASE INHIBITION.
ATROPINE IV IS ANTIDOTAL. 2-PAM IS ALSO ANTIDOTAL WHEN ADMINISTERED
EARLY & INCONJUNCTION WITH ATROPINE.//FLUID MAY SOFTEN SOME
PLASTICS.

Respiratory Protection:NIOSH/MSHA APPROVED RESP SELECTED FOR
POT.EXPOSURES & USE CONDITION
Ventilation:RECOMMENDED ESP IF USE CONDITIONS GENERATE AEROSOLS/VAPORS.
Protective Gloves:RECOMMENDED
Eye Protection:SPLASH-PROOF GOGGLES
Other Protective Equipment:APRONS, FOOTWEAR SELECTED W/REGARD TO
EXPOSURE POTENTIAL.
Supplemental Safety and Health
VISCOSITY: 500-600 SUS AT 100 F. THIS HIGH VISCOSITY FLUID (TYPE II OF
MIL-H-19457B) IS NO LONGER SPECIFIED BY MIL-H-19457C. FIRE
POINT:665 F; 352C (COC) POUR POINT: 20F; -7C DECOMP TEMP:>665F

HCC:V6
Vapor Pres:0.1
Spec Gravity:1.15
Evaporation Rate & Reference:VERY LOW RATE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS, CLEAR LIQUID WITH ESSENTIALY NO ODOR.

Stability Indicator/Materials to Avoid:YES
MOISTURE: ACIDIC OR ALKALINE CONDITIONS. VERY HIGH TEMPS.
Stability Condition to Avoid:TEMP >150F & MOISTURE COMBINE TO CAUSE
SLOW HYDROLYSIS.
Hazardous Decomposition Products:PHENOL, ALKYL PHENOLS, ARYL PHOSPORIC
ACIDS WHEN HYDROLYZED.
Conditions to Avoid Polymerization:IN ABSENCE OF MOISTURE, FLUID
REMAINS STABLE TO HIGH TEMPS.

Waste Disposal Methods:FOLLOW FED,STATE & LOCAL REGULATIONS. MFR
RECOMMENDS DISPOSAL OF SEALED CONTAINERS IN AN APPROVED LANDFILL,
INCINERATION BY A LICENSED OPERATOR W/ APPROPRIATE POLLUTION
CONTROLS, OR SALVAGE & RECLAMAT ION IF QUANTITY JUSTIFIES.
RECLAMATION PREFERRED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.